CO Monitoring & Ventilation Systems Archives - Zeta Alarms https://www.zetaalarmsystems.com/products/gas-detection/co-monitoring-ventilation-systems/ Specialist manufacturers of high quality fire alarm systems for over three decades Tue, 19 Aug 2025 06:53:45 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://www.zetaalarmsystems.com/wp-content/uploads/2024/05/cropped-Zeta-Logo-32x32.png CO Monitoring & Ventilation Systems Archives - Zeta Alarms https://www.zetaalarmsystems.com/products/gas-detection/co-monitoring-ventilation-systems/ 32 32 Simplicity CO Raptor Weatherproof Combined Sounder Beacon – Installation Manual https://www.zetaalarmsystems.com/downloads/simplicity-co-raptor-weatherproof-combined-sounder-beacon-installation-manual/ Wed, 08 May 2024 14:06:32 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1551 The Raptor conventional sounder with beacon has a coverage pattern of W 2.9 – 8.5 and the sounder part has 22 selective tones. It has been designed to make an “electronics free” first fix and is available in red or white.

The post Simplicity CO Raptor Weatherproof Combined Sounder Beacon – Installation Manual appeared first on Zeta Alarms.

]]> The Raptor conventional sounder with beacon has a coverage pattern of W 2.9 – 8.5 and the sounder part has 22 selective tones.

It has been designed to make an “electronics free” first fix and is available in red or white.

The post Simplicity CO Raptor Weatherproof Combined Sounder Beacon – Installation Manual appeared first on Zeta Alarms.

]]> Simplicity CO Raptor Weatherproof Combined Sounder Beacon – Datasheet https://www.zetaalarmsystems.com/downloads/simplicity-co-raptor-weatherproof-combined-sounder-beacon-datasheet/ Wed, 08 May 2024 14:04:19 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1548 The Raptor conventional sounder with beacon has a coverage pattern of W 2.9 – 8.5 and the sounder part has 22 selective tones. It has been designed to make an “electronics free” first fix and is available in red or white.

The post Simplicity CO Raptor Weatherproof Combined Sounder Beacon – Datasheet appeared first on Zeta Alarms.

]]> The Raptor conventional sounder with beacon has a coverage pattern of W 2.9 – 8.5 and the sounder part has 22 selective tones.

It has been designed to make an “electronics free” first fix and is available in red or white.

The post Simplicity CO Raptor Weatherproof Combined Sounder Beacon – Datasheet appeared first on Zeta Alarms.

]]> Simplicity CO Raptor Weatherproof Sounders – Installation Manual https://www.zetaalarmsystems.com/downloads/simplicity-co-raptor-weatherproof-sounders-installation-manual/ Wed, 08 May 2024 14:01:07 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1544 The Raptor conventional sounder is a large weatherproof horn sounder suitable for many indoor & outdoor applications. It is available in red or white and has selection of 22 tones. Termination of field wiring is made to the backbox for a clean first fix.

The post Simplicity CO Raptor Weatherproof Sounders – Installation Manual appeared first on Zeta Alarms.

]]> The Raptor conventional sounder is a large weatherproof horn sounder suitable for many indoor & outdoor applications.

It is available in red or white and has selection of 22 tones. Termination of field wiring is made to the backbox for a clean first fix.

The post Simplicity CO Raptor Weatherproof Sounders – Installation Manual appeared first on Zeta Alarms.

]]> Simplicity CO Raptor Weatherproof Sounders – Datasheet https://www.zetaalarmsystems.com/downloads/simplicity-co-raptor-weatherproof-sounders-datasheet/ Wed, 08 May 2024 13:59:43 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1537 The Raptor conventional sounder is a large weatherproof horn sounder suitable for many indoor & outdoor applications. It is available in red or white and has selection of 22 tones. Termination of field wiring is made to the backbox for a clean first fix.

The post Simplicity CO Raptor Weatherproof Sounders – Datasheet appeared first on Zeta Alarms.

]]> The Raptor conventional sounder is a large weatherproof horn sounder suitable for many indoor & outdoor applications.

It is available in red or white and has selection of 22 tones. Termination of field wiring is made to the backbox for a clean first fix.

The post Simplicity CO Raptor Weatherproof Sounders – Datasheet appeared first on Zeta Alarms.

]]> Simplicity CO Interface – Installation Manual https://www.zetaalarmsystems.com/downloads/simplicity-co-interface-installation-manual/ Wed, 08 May 2024 13:55:23 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1532 The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Simplicity CO panel using normally open dry contact connections. The connection to the input is monitored for fault (open or short circuit) and Alarm conditions.

The post Simplicity CO Interface – Installation Manual appeared first on Zeta Alarms.

]]> The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Simplicity CO panel using normally open dry contact connections.

The connection to the input is monitored for fault (open or short circuit) and Alarm conditions.

The post Simplicity CO Interface – Installation Manual appeared first on Zeta Alarms.

]]> Simplicity CO Interface – Datasheet https://www.zetaalarmsystems.com/downloads/simplicity-co-interface-datasheet/ Wed, 08 May 2024 13:54:29 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1529 The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Simplicity CO panel using normally open dry contact connections. The connection to the input is monitored for fault (open or short circuit) and Alarm conditions.

The post Simplicity CO Interface – Datasheet appeared first on Zeta Alarms.

]]> The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Simplicity CO panel using normally open dry contact connections.

The connection to the input is monitored for fault (open or short circuit) and Alarm conditions.

The post Simplicity CO Interface – Datasheet appeared first on Zeta Alarms.

]]> Simplicity CO Detector – Datasheet https://www.zetaalarmsystems.com/downloads/simplicity-co-detector-datasheet/ Wed, 08 May 2024 13:51:49 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1527 The CO800G analogue addressable Carbon Monoxide detector is specifically designed for use with the Simplicity CO addressable carbon monoxide monitoring & ventilation panel. The detector uses an electro-chemical sensor with the detection range od 0 to 600 ppm of carbon monoxide. The detectors address is set via a binary dipswitch on the rear of the […]

The post Simplicity CO Detector – Datasheet appeared first on Zeta Alarms.

]]> The CO800G analogue addressable Carbon Monoxide detector is specifically designed for use with the Simplicity CO addressable carbon monoxide monitoring & ventilation panel.

The detector uses an electro-chemical sensor with the detection range od 0 to 600 ppm of carbon monoxide. The detectors address is set via a binary dipswitch on the rear of the detector.

The post Simplicity CO Detector – Datasheet appeared first on Zeta Alarms.

]]> Simplicity CO Detector – User Manual https://www.zetaalarmsystems.com/downloads/simplicity-co-detector-user-manual/ Wed, 08 May 2024 13:49:51 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1524 The CO800G analogue addressable Carbon Monoxide detector is specifically designed for use with the Simplicity CO addressable carbon monoxide monitoring & ventilation panel. The detector uses an electro-chemical sensor with the detection range od 0 to 600 ppm of carbon monoxide. The detectors address is set via a binary dipswitch on the rear of the […]

The post Simplicity CO Detector – User Manual appeared first on Zeta Alarms.

]]> The CO800G analogue addressable Carbon Monoxide detector is specifically designed for use with the Simplicity CO addressable carbon monoxide monitoring & ventilation panel.

The detector uses an electro-chemical sensor with the detection range od 0 to 600 ppm of carbon monoxide. The detectors address is set via a binary dipswitch on the rear of the detector.

The post Simplicity CO Detector – User Manual appeared first on Zeta Alarms.

]]> Simplicity CO Panels – User Manual https://www.zetaalarmsystems.com/downloads/simplicity-co-panels-user-manual/ Wed, 08 May 2024 13:46:56 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1522 The Simplicity CO system is a self conditioned controller with a capacity to handle up to 110 CO monitors which are divided to 8 monitoring zones. Each Zone will permanently display on the Liquid Crystal Display (LCD) the highest concentration of CO in that zone in PPM (Particles Per Million). This monitored value is updated […]

The post Simplicity CO Panels – User Manual appeared first on Zeta Alarms.

]]> The Simplicity CO system is a self conditioned controller with a capacity to handle up to 110 CO monitors which are divided to 8 monitoring zones.

Each Zone will permanently display on the Liquid Crystal Display (LCD) the highest concentration of CO in that zone in PPM (Particles Per Million). This monitored value is updated every 10 seconds. The system will allow up to 2 interface modules (ZIOU/I-230) which are programmed to initiate a signal to Ventilation equipments to operate at pre-determined levels of concentration. Should the CO concentration keep rising while the Ventilation is still on, an alarm is raised at a pre-determined level.

The post Simplicity CO Panels – User Manual appeared first on Zeta Alarms.

]]> Simplicity CO Panels – Installation Manual https://www.zetaalarmsystems.com/downloads/simplicity-co-panels-installation-manual/ Wed, 08 May 2024 13:43:42 +0000 https://www.zetaalarmsystems.com/?post_type=installation-manual&p=1520 The Simplicity CO system is a self conditioned controller with a capacity to handle up to 110 CO monitors which are divided to 8 monitoring zones. Each Zone will permanently display on the Liquid Crystal Display (LCD) the highest concentration of CO in that zone in PPM (Particles Per Million). This monitored value is updated […]

The post Simplicity CO Panels – Installation Manual appeared first on Zeta Alarms.

]]> The Simplicity CO system is a self conditioned controller with a capacity to handle up to 110 CO monitors which are divided to 8 monitoring zones.

Each Zone will permanently display on the Liquid Crystal Display (LCD) the highest concentration of CO in that zone in PPM (Particles Per Million). This monitored value is updated every 10 seconds. The system will allow up to 2 interface modules (ZIOU/I-230) which are programmed to initiate a signal to Ventilation equipments to operate at pre-determined levels of concentration. Should the CO concentration keep rising while the Ventilation is still on, an alarm is raised at a pre-determined level.

The post Simplicity CO Panels – Installation Manual appeared first on Zeta Alarms.

]]>